The workings of this question must be included in the PDF file to be uploaded at the end of the exam. Be organised and specify the question and subquestion number. A three-phase transmission line with per-phase reactance of 10 ohms is supplying a per-phase load of 100 MW at 0.95 lagging power factor. If the load voltage (line-to-line) is 132 kV with an angle of 0°, using 4 decimal places: 12pt 1. Calculate the sending end (line-to-line) voltage magnitude and angle. [3 pts] II. Calculate the total active and reactive power of the sending end. [2 pts] III. Calculate the total active and reactive power losses due to the transmission line. [3 pts] IV. Draw the phasor diagram of the line-to-line voltages of the sending end, transmission line and the receiving end. Specify the angles. [