A 40-m steel tape weighing 2.08 kg is of standard length under a pull of 7.1 kg, supported for full length. The tape was used in measuring a line 950.00 m long on a smooth level ground under a steady pull of 6.5 kg. Assuming E= 2.10x10 kg/cm², and cross sectional area equals to 0.045 sq.cm. Compute the following: A) Corrected length of the tape B) Correct length of the line measured SITUATION#08: (20pts) A 35.0 m steel tape weighs 2.10 kg and is supported at its end points and at the 10-m and 24-m marks. If a pull of 5.5 kg is applied, determine the correct distance between the ends of the tape. SITUATION #09: (30pts) Side AB of an equilateral triangle has a bearing of N 69°13' W. If vertex C lies somewhere north of side AB, determine the bearings of sides BC and CA.