In this procedure, you will draw a P&ID for a given process control system. This process is similar to drawing a schematic diagram for an electrical or fluid power circuit. 1. Draw a P&ID based on the following description. Draw your diagram on a separate piece of paper. Description: •The system is a level control loop that controls the level of a liquid in a tank. •The tank uses two level sensors, one for the high level and the other for the low level. •These sensors send electrical signals to an electronic level controller, which is mounted in the control room and is accessible to the operator. •The controller includes a digital display. •The controller controls the flow into and out of the tank by controlling two solenoid valves, one in the input line and one in the output line. The control loop number is 100