Draw a P&ID based on the following description. Draw your diagram on a separate piece of paper. Description: • The system is a flow control loop that controls the flow of two liquids into a mixing tank. • The controller must maintain an exact ratio of the two fluids. • The controller, a computer located in the control room, controls the flow of each fluid into the tank using motor-actuated valves. • The flow of the two liquids is measured using venturi tubes with flow trans- mitters connected to them. • The flow transmitters, which provide feedback to the controller, are located in primary location but are inaccessible. • The controller controls the flow of the mixture out of the tank using a diaphragm-actuated valve. • A transducer is' needed to convert the electrical signal from the controller to a pneumatic signal. • The control loop number is 600