Equipment used:

Multisim

This is part one of a two-part lab. In this part you will use Multisim to simulate the circuit shown below. You will also calculate the currents and voltages in the circuit and compare those calculated values to the Multisim measurements.

R1 = 560 Ω, R2 = 1000 Ω, R3 = 1200 Ω, V1 = 6V, V2 = 9V

For this part of the lab you will be building the circuit in Multisim and measuring the voltages and currents in each element All data needs to be recorded in the tables below and included in your submission. You will be using the calculated and Multisim columns for this week’s lab. You will fill in the measured column in part 2 of the lab. For this step you will need to include a screenshot of your Multisim circuit in the lab report. Pictures showing each measurement tool used to obtain the measured data should also be included in the report. You can do this with two pictures, with one picture containing 3 voltage measurements and the other picture containing 3 current measurements. To capture pictures of Multisim you my use the snipping tool built into windows.