TASK1 (32%): Run OSPFv2 only on R1 by adding all participating networks. Choose process id of 100. Set router IDs as: R1=1.1.1.1
Set the OSPF cost of the link connected to the 10.10.124.0/24 network to "10'.
Manipulate the DR/BDR election by using the "priority' command. Set R1 never to be the DR.
Double the value of the "dead interval" timer.
Redistribute the default route already configured on R1 into the OSPF process.
TASK 2 (32%): Statically translate the IP of Server0 to : 67.69.30.250/8.
Translate all internal IPs on 10.10.2.0/24 network to any live IP from range 47.55.102.83 - 47.55.102.200/8. Assume all hosts can transmit at any time.
Name the ACL 'NET_2".
TASK 3 (28%): Only H2 must be allowed to access any Telnet line on R1. Name the ACL 'TELNET'
Block H3 from accessing the WWW server, but leave H1 to be able to access the WWW server. Configure the ACL on R1. Name the ACL "WWW"
TASK 4 (8%): Sync all system clock of all routers to the clock of R1. Enable CDP on Gi0/2 of R1.
