Respuesta :

oopsydaisy

The correct answer is;  Shoring equipment must be inspected before, during and after the erection of all formwork.

Further Explanation:

Since there is no choices that can be used to determine the best answer, I will  state when shoring is appropriate. Shoring is done when digging on numerous job-sites and building houses, businesses, etc. When the company receives the shoring equipment, it needs to be inspected immediately before use.

During the project, all of the equipment should be inspected once again to make sure that the equipment is in working condition. OSHA does not give clear guidelines on the inspection process so many companies have their own. Some of the things that are inspected on the shoring equipment are;

  • checking for leaking fluids in the cylinders
  • checking to be sure the shore has been pressurized and sustains a pressure of 750 psi to 1500 psi.
  • pressure can be held for approximately 60 seconds

Learn more about shoring equipment at https://brainly.com/question/5428790

#LearnwithBrainly

codedmog101

Answer:well, the question is not complete, we do not have the options, but , not to worry, I will give you somethings to help you solve this kind of problem.

Explanation:

Shoring equipments are the equipments used in holding up or supporting structures.

Okay, Occupational Safety and Health Administration(OSHA) is an agency that is saddled with the responsibility of providing a safe environment in workplaces. Shoring equipments are used in engineering works, and, there are rules and regulations provided by Occupational Safety and Health Administration(OSHA) so as to maintain safety in the field.

One of the rules and regulations provided by Occupational Safety and Health Administration(OSHA) is the one concerning the use of offshore equipments. The regulation says that;

" All Shoring equipment (including equipment used in reshoring operations) shall be inspected prior to erection to determine that the equipment meets the requirements specified in the formwork drawings''

The above quote of the rules and regulations set by Occupational Safety and Health Administration(OSHA) can be found in 1926.703(b)(1) of the Safety and Health Regulations for Construction, United States Department of Labour.

Therefore, to answer the question, all shoring equipments must be inspected before, during and after the formwork.

Otras preguntas