contestada

You have purchased a printer that has the capability to print in duplex mode so that users can print on both sides of a sheet of paper. However, when users try to use this capability when they send a print job, documents are s till printed on only one side. Which of the following might be the problem?a. The print timeout is set too low in the printer's properties Advanced tab, which does not allow enoughtime for duplexingb. No printer driver is installed for the printer, and Windows Server 2016 is using the Generic Print Mode Driverc. The duplex button is not turned to on in the Printers windowd. The duplex mode needs to be enabled on the Device Settings tab in the printer's properties

Respuesta :

If you have purchased a printer that has the capability to print in duplex mode so that users can print on both sides of a sheet of paper. However, when users try to use this capability when they send a print job, documents are still printed on only one side. Then there might be a problem with (d) THE DUPLEX MODE NEEDS TO BE ENABLED ON THE DEVICE SETTINGS TAB IN THE PRINTER'S PROPERTIES.

Explanation:

  • If the duplex mode isn't enable on the printer setting, then the printer is still going to read that the output should come in a single page and not in the duplex mode.
  • When facing such a problem, the user should go to the "Device Settings" tab in the printer properties and change the required settings to print according to the users needs.

Otras preguntas