The microcontroller you're using is running on an 4MHz clock. You are required to: [7 Marks] Define the parameters to be programmed in so TMR2 will generate an overflow every 0.032 seconds. Present all computatio [3 Marks] ns. Assume that on CCP1 pin (in/out pin attached to CCP module 1 that uses TMR1) a signal with frequency fx is applied. Considering that the content of TMR1 is N₁ at the beginning of the cycle, TMR1 prescaler ratio is P₁ and CCP1 prescaler ratio is PCCP determine the content of TMR1 (N2) after one cycle if: (Present all computations) • fx=10KHz, N1=100, P14, PCCP 4- N2= [2 marks] • fx=50KHz, N1=250, P1-4, PCCP 16 N2™_ [2 marks]